Leybold

Single-line CCD camera for high-resolution registration of motions and relative measurement of intensities. For connection to the USB port of a computer. Including software for recording and evaluating measurements.

Technical Data •2048 pixels When registering positions, the positions...

For experiments on two-dimensional motion in virtually friction-free conditions. Glass plate experimentation surface with two pucks, each having a built-in electric fan for producing air cushion. Power supply to the pucks via thin flexible leads connected from over-head arm. The movement of the...

For oscillation experiments, with 2 axles for attaching to the support block (301 25) of for fastening to supports. Technical Data * Bar pendulum: l = 40 cm * Axles: l = 10 cm, d = 4 mm Additional accessories required: 1 set of 6 weights 340 85 2 support clips, for...

For determination of acceleration due to gravity. Physical pendulum with two adjustable metal discs as bobs for determining the periods of oscillation, as well as two knife edges for suspension. When adjusted correctly, the pendulum has a period of oscillation of one second in both operational...

Rod with 2 movable weights for investigating the oscillations of a physical pendulum or reversible pendulum using the rotational sensor S (524 082). Technical Data * Length: 30 cm * Borings: 5 borings for universal fixing or coupling of several pendulums 1 Rod 2 Weights,...

For Foucault's and other pendulum experiments, as well as experiments on inertia. Consists of a ball with two eyelets and a knurled screw with a borehole for fastening the thread; toe bearings provide a low-friction pendulum suspension Technical Data * Ball diameter: 60 mm *...

For the investigation of the oscillating behaviour of coupled systems. Consists of two adjustable physical pendulums with eyelets for suspension, a movable coupling hook, and an additional weight for coupling. The period of oscillation of each pendulum can be adjusted using adjustable bobs and...

For experiments on regular accelerated rotation as well as for investigating gyroscope motion in the absence of forces and in the general case (precession, nutation). Balanced spoke-wheel with a large moment of inertia and a protruding, basket-shaped, ball-bearing hub, which allows arbitrary...

For observation of the gyroscope phenomena and for demonstration and measuring of precessional and nutational motions, with three extreme smooth running axes with double ball bearings - for upright shaft - for horizontal axis - in gyroscope disk. Set-up in adjusting stand base, holder with...

Helical springs for extension and oscillation experiments Technical Data * Spring constant: 3 Nm-1 * max. load: approx. 2 N * Length: 15 cm * Diameter: 3 cm

Especially for experiments on elastic and inelastic collisions. Technical Data * Diameter: 30 mm, each * Weight: 110 g, each Additionally required: Precision metal rail 460 81

For measurement of cP /cV after Rüchardt, also for experiments on internal friction of gases; consisting of a precision glass tube with precisely fitting steel ball. If the tube is fitted on the 10 l glass bottle, the ball inside the tube can be made to oscillate; cp /cv is determined from the...

For flow tests in an open air stream, in conjunction with the suction and pressure fan (373 04). Consists of an additional nozzle, precision metal rail and holding clamp for the sector dynamometer (373 14). Technical Data * Aperture of nozzle:150 mm * Length of metal rail: 50 cm...

Resistance bodies of different shapes and sizes with various fixtures for determining air resistance in the open aerodynamics working section (373 06) or the wind tunnel (373 12). Technical Data * Diameter of circular discs: 40, 56 and 80 mm * Solid bodies: Diameter: 56 mm...

With weight and hook.

Closed working section with transparent side walls and interchangeable bottom, for quantitative experiments relating to aero-dynamics and the physics of flight, in combination with the suction and pressure fan (373 04). Includes a suction nozzle for turbulence- free air intake and outlet nozzle,...

For measuring static pressure, total pressure and dynamic pressure in gas flows with the precision manometer (373 10). Angled, double tube with differently oriented sensor apertures. Includes two plastic hoses for manometer connections.

Technical Data •Hose diameter: 8 mm •Pressure...

Precision dynamometer for measuring flow resistance in the "open" aerodynamics working section (373 06) or the wind tunnel (373 12).

Technical Data •Measuring range: 0.65 N Scale division: 0.01 N Length of scale arc: 200 mm •Mechanical mounting: two 4 mm plugs •Dimensions: 20...

For investigating the pressure characteristic produced in the vicinity of the air foil when the air flow is directed against it. With nine borings in the upper and lower sides, and pressure gauging points on the side. Adjustable angle of incidence, lateral baffle plates for attenuating boundary...

Simple mechanical air pump for evacuating small recipients, e.g. that of the vacuum experiment chamber (378 88) in the low-vacuum range. With integrated ventilation valve and pointer-type manometer. Complete with plastic tubing, l = 60 cm, dia. = 6.5 mm.

Technical Data •Pumping...