Leybold Products
|
196 Item(s) Page 1 of 10 | 1 2 3 4 5 6-10 Last Next >>
30040 Stand rod 10 cm, 12 mm Ø
Made of solid corrosion-resistant special steel. Technical Data * Diameter: 12 mm * Length 10 cm
Click to view
30041 Stand rod 25 cm, 12 mm Ø
Made of solid corrosion-resistant special steel. Technical Data * Diameter: 12 mm * Length: 25 cm
Click to view
30043 Stand rod 75 cm, 12 mm Ø
Made of solid corrosion-resistant special steel. Technical Data * Diameter: 12 mm * Length 75 cm
Click to view
30044 Stand rod 100 cm, 12 mm Ø
Made of solid corrosion-resistant special steel. Technical Data * Diameter: 12 mm * Length: 100 cm
Click to view
30046 Stand rod 150 cm, 12 mm Ø
Made of solid corrosion-resistant special steel. Technical Data * Diameter: 12 mm * Length: 150 cm
Click to view
30105 Bench Clamp With Pin
For securing devices with a horizontal bore to bench tops or the vertical stand (580 12) at dish plates.
Technical Data •Pin dimensions: 5.5 cm x 8 mm Ø •Bench top thickness: 60 mm approx.
Click to view
30106 Bench clamp
Screw-on clamp for mounting rods, panels and optical benches (460 43) to bench tops. With two threaded bores, through which the clamping screw can be inserted according to requirement. Technical Data * Jaw width for stand rods: 27 mm * Jaw width for panels: 20 mm * Bench top...
Click to view
30107 Simple bench clamp
For vertical clamping of rods to bench tops. Mounting in two bores by clamping screws Technical Data * Jaw width: 14 mm * Bench-top thickness: 60 mm
Click to view
30108 Clamp with hook
For suspending thread pendulums, spring balances and simple rope machines (pulleys etc.). Technical Data * Length of the base rod: 9 cm * Span width of the clamp: max. 14 mm
Click to view
30109 Bosshead S
For perpendicular connection of rods and tubes
Technical Data •Jaw width: 16 mm
Click to view
30111 Clamp with jaw clamp
Suitable for use with stand material for fixing of tubes, flasks and other cylindrically shaped parts. Technical Data * Length: 16 cm approx. * Jaw width: 20 to 80 mm * Span width to the clamp: max. 14 mm
Click to view
30121 Stand base MF
Span width for vertical rods: max. 13 mm resp. ½ inch Bore for base rods: 10 mm Ø each Plug-in bores: 4 mm Ø each Dimensions: 18.5 cm x 4 cm x 3.5 cm
Click to view
30125 Support block
For attaching plug-in axle (from 340 811ET2), coupling plug (from 340 89ET5) and support clip (from 314 04ET5) to stand rods or tubes or holder for thread and leaf-spring. Technical Data * 4 mm plug-in bores: 8 * Span width for rods and tubes: max. 13 mm or 1/2 inch *...
Click to view
30126 Stand rod 25 cm, 10 mm Ø
Made of solid, corrosion-resistant, special steel. Technical Data * Diameter: 10 mm * Length: 25 cm
Click to view
301300 Demonstration-experiment-frame
Vertical assembly facility, allows versatile combinations.
Technical Data •Dimensions: 97 cm x 85 cm x 34 cm Scope of delivery 2 side sections 1 transverse rod 2 profile rails
Click to view
30325 Safety immersion heater
With overheat protection Technical Data * Power supply: 230 V, 50 Hz, via mains supply * Power consumtion: 1000 W
Click to view
31154 Precision Vernier Callipers
With instant-action locking device for internal, external and depth measurements, stainless steel (all hardened).
Technical Data •Measuring range: 150 mm and 6 inches •Graduation: mm with vernier reading to 1/20 mm inch with vernier reading to 1/128inch
Click to view
31177 Steel Tape Measure
With automatic rewind; spring band steel. Technical Data Length: 2 m/78 inches Metric scale: cm and mm graduation Imperial scale: 1 /16� graduation
Click to view
311902 Rotating Platform
For experiments in which certain components are to be continuously turned and the respective angles determined either with a recorder or via a computer interface (CASSY), e.g. diffraction experiments with ultrasonics, angular distribution of micro-waves. The system is driven by a DC gear motor...
Click to view
