Leybold Products

For x-ray apparatus 554 800/801 for measuring ionization current and determining the ion dose rate; electrical connections via 4 mm safety sockets and BNC socket. 3 plug-inmounting pins for defined setup of plate capacitor in the experiment zone.

For pressing a crystal powder and then measuring the X-ray diffraction spectrums with powder samples in the x-ray apparatus (554 801).

For recording the X-ray fluorescence spectrum of different elements in the X-ray apparatus (554 801)in connection with the X-ray energy detector (559 938), Sensor-CASSY (524 010USB) and MCA box (524 058).

Technical Data

Materials: Ti, Fe, Ni, Cu, Zn, Zr, Mo, Ag Dimensions: 25...

For recording the X-ray fluorescence spectrum of different elements in the X-ray apparatus (554 801) in connection with the X-ray energy detector (559 938), Sensor-CASSY (524 010USB) and MCA box (524 058).

Technical Data

Materials: Ag, In, Sn, W, Au, Pb Dimensions: 25 mm x 25 mm

For recording the X-ray fluorescence spectrum of different alloys in the X-ray apparatus (554 801) in connection with the X-ray energy detector (559 938), Sensor-CASSY (524 010USB) and MCA box (524 058).

Technical Data

Materials: special steel (X5CrNi18-10), brass (CuZn36),...

Directly heated hot cathode tube with screw thread for heat sink and two-pin plug socket for cathode heating for X-ray apparatus (554 800 / 554 801).

Technical Data � Anode material: Molybdenum � characteristic radiation: K� =71.1 pm (17.4 kev), K� =63.1 pm (19.6 keV) �...

Directly heated hot cathode tube with screw thread for heat sink and two-pin plug socket for cathode heating for X-ray apparatus (554 800 / 554 801).

Technical Data � Anode material: Copper � characteristic radiation: K� = 154 pm (8.04 kev), K� = 139 pm (8.91 keV) � Max....

Directly heated hot cathode tube with screw thread for heat sink and two-pin plug socket for cathode heating for X-ray apparatus (554 800 / 554 801). Technical Data � Anode material: Iron � characteristic radiation: K� = 194 pm (6.40 kev), K� = 176 pm (7.06 keV) � Max. emission...

Directly heated hot cathode tube with screw thread for heat sink and two-pin plug socket for cathode heating for X-ray apparatus (554 800 / 554 801).

Technical Data

Anode material: Tungsten characteristic radiation: La = 148 pm (8.39 kev), L� = 128 pm (9.67 keV) Max. emission...

Directly heated hot cathode tube with screw thread for heat sink and two-pin plug socket for cathode heating for X-ray apparatus (554 800 / 554 801).

Technical Data � Anode material: Tungsten � characteristic radiation: La = 148 pm (8.39 kev), L� = 128 pm (9.67 keV) � Max....

Self-quenching Geiger-Müller counter tube, in a plastic housing, with a very thin mica end-window which also allows the registration of soft β radiation. With a permanently attached cable. Complete with a protective cap for the mica window. Technical Data •Gas filling: neon, argon,...

The energy detector is designed for use with the x-ray apparatus 554 801, recording energy separated measurements within the x-ray spectrum. The detector expands the range of experiments possible in quantum and atomic physics, and will also perform non-destructive material analysis.

Coaxial cable with a separate connecting plug for screening. Technical Data •Impedance: 50 Ohm •Cable capacitance: 120 pF •Length: 1.15 m

For demonstrating gravitational attraction between two bodies and determining the gravitational constant. Highly sensitive torsion dynamometer, whose deflection can be observed and measured via a luminous pointer or with the IR position detector (332 11). The torsion system consists of a bronze...

For the investigation of free rotary oscillations at different dampings (aperiodic, creeping and limit adjustment) and of forced oscillations (resonance curves, phase changes between exciter and resonator). Oscillation system consisting of ball-bearing wheel, which is connected to the driving rod...