X-Ray Apparatus

Designed to fit the goniometer of the x-ray apparatus(554 801). For experiments in Braggs configuration, e.g. diffraction(up to the 5th order), x-ray spectra, wavelength determination, Duane and Hunts displacement law, determining Planks constant, dependence of absorbtion on wavelength,...

Designed to fit the goniometer of the x-ray apparatus(554 801). For experiments in Braggs configuration, e.g. diffraction(up to the 5th order), x-ray spectra, wavelength determination, Duane and Hunts displacement law, determining Planks constant, dependence of absorbtion on wavelength,...

With two independently controllable stepping motors which move the sensor and target arm. The motion is defined using the key in the control panel of the X-ray apparatus. (554 800 and 554 801) and initiated manually or automatically. Included in the scope of supply of the X-ray apparatus (554 801).

For X-Ray Apparatus 554 800/801. Foils mounted in frame for attaching to silt diaphram collimator or counter-tube holder.

For x-ray apparatus (554801) Two absorbers for quantitative investigation of the attenuation of x-rays as a function of the thickness and the atomic number of the absorber.

For x-ray apparatus (554 801) for investigation the Compton effect by means of wavelenth dependant transmission as a function of the placement of the Cu filter in front of or behind the aluminum scattering body; with aluminum scattering body and copper filter in frame.

For x-ray apparatus 554 800/801, with printed scale for defined positioning of films for transillumination, Laue diagrams and Debye-Scherrer photographs; includes experiment rail with millimeter scale and pinhole diaphram D=1 mm for attaching to silt-diaphragm collimator.

Suitable x-ray...

For x-ray apparatus 554 800/801 for measuring ionization current and determining the ion dose rate; electrical connections via 4 mm safety sockets and BNC socket. 3 plug-inmounting pins for defined setup of plate capacitor in the experiment zone.

For pressing a crystal powder and then measuring the X-ray diffraction spectrums with powder samples in the x-ray apparatus (554 801).

Directly heated hot cathode tube with screw thread for heat sink and two-pin plug socket for cathode heating for X-ray apparatus (554 800 / 554 801).

Technical Data · Anode material: Molybdenum · characteristic radiation: Ká =71.1 pm (17.4 kev), Kâ =63.1 pm (19.6 keV) · Max....

Directly heated hot cathode tube with screw thread for heat sink and two-pin plug socket for cathode heating for X-ray apparatus (554 800 / 554 801).

Technical Data · Anode material: Copper · characteristic radiation: Ká = 154 pm (8.04 kev), Kâ = 139 pm (8.91 keV) · Max. emission...

Directly heated hot cathode tube with screw thread for heat sink and two-pin plug socket for cathode heating for X-ray apparatus (554 800 / 554 801). Technical Data · Anode material: Iron · characteristic radiation: Ká = 194 pm (6.40 kev), Kâ = 176 pm (7.06 keV) · Max. emission current:...

Directly heated hot cathode tube with screw thread for heat sink and two-pin plug socket for cathode heating for X-ray apparatus (554 800 / 554 801).

Technical Data

Anode material: Tungsten characteristic radiation: La = 148 pm (8.39 kev), Lâ = 128 pm (9.67 keV) Max. emission...

Directly heated hot cathode tube with screw thread for heat sink and two-pin plug socket for cathode heating for X-ray apparatus (554 800 / 554 801).

Technical Data · Anode material: Tungsten · characteristic radiation: La = 148 pm (8.39 kev), Lâ = 128 pm (9.67 keV) · Max. emission...

Fully-featured, microprocessor-controlled device with x-ray tube Mo and goniometer designed for conducting a wide variety of experiments in x-ray physics. The high-voltage system, x-ray tube and experiment chamber are all within a radiation-proof housing. German type approval as school x-ray...

For investigating the Compton-effect on X-ray radiation in combination with the X-ray energy detector (559 938) and the X-ray apparatus (554 801). Consists of a circular collimator and a Plexiglas radiation body.

Technical Data

Dimensions: 25 mm x 25 mm x 6 mm

For recording the X-ray fluorescence spectrum of different elements in the X-ray apparatus (554 801)in connection with the X-ray energy detector (559 938), Sensor-CASSY (524 010USB) and MCA box (524 058).

Technical Data

Materials: Ti, Fe, Ni, Cu, Zn, Zr, Mo, Ag Dimensions: 25...

For recording the X-ray fluorescence spectrum of different elements in the X-ray apparatus (554 801) in connection with the X-ray energy detector (559 938), Sensor-CASSY (524 010USB) and MCA box (524 058).

Technical Data

Materials: Ag, In, Sn, W, Au, Pb Dimensions: 25 mm x 25 mm

For recording the X-ray fluorescence spectrum of different alloys in the X-ray apparatus (554 801) in connection with the X-ray energy detector (559 938), Sensor-CASSY (524 010USB) and MCA box (524 058).

Technical Data

Materials: special steel (X5CrNi18-10), brass (CuZn36),...

The energy detector is designed for use with the x-ray apparatus 554 801, recording energy separated measurements within the x-ray spectrum. The detector expands the range of experiments possible in quantum and atomic physics, and will also perform non-destructive material analysis.