Networking Automotive Systems: Brake Assist
The FlexRay training system contains a brake assistant function. It combines the following:
- a distance sensor control unit
- a road condition sensor
- an ABS/ESP control unit, and
- an instrument cluster.
Two model cars simulate two vehicles tailgating. The FlexRay data bus transfers this state to the control unit for ABS/ESP, which then triggers the brakes to establish the safe distance again. The default value depends on the road condition (dry, wet, slick). The LIN data bus transmits the roadway’s condition to the radar sensor control unit.
Activating the high-pressure switch valve and the pump displays the brake’s function.
A high-speed CAN bus connection controls the corresponding indicator lamp in the instrument cluster.
The system can be expanded to an “active star” (773 959) with FlexRay components. The sensor control unit also has an available connection for a FlexRay/USB interface (773 960) to analyze the protocol on the computer.
The FlexRay lines can be completed with external resistors and are set for signal registration with an oscilloscope.
COMPONENTS OF EQUIPMENT SETS:
|1||773 958||FlexRay Brake Assist|
|1||773 960||FlexRay interface USB|
|1||773 959||FlexRay Active Star|
|1||738 10||Ignition switch|
|1||575 303||** Digital storage oscilloscope 1222|
|1||524 013||** Sensor-CASSY 2|
|1||524 0033||* WiFi adapter for Sensor-CASSY|
|1||739 589||** Software: Vehicle diagnosis, German and English|
|1||524 013SKFZ||Sensor-CASSY 2 Starter, Automotive|
|1||738 02||** Automotive power supply 13.8 V/36 A|
|4||577 28||Resistor, 47 Ω, STE 2/19|
|2||577 32||Resistor, 100 Ω, STE 2/19|
|3||500 59||Safety bridging plugs, black, set of 10|
|1||500 592||Safety bridging plugs with tap, black, set of 10|
|1||738 9821||Safety experiment cables, set of 51|
|1||775 066DE||LIT: A184.108.40.206 Brake assist|
|1||775 066EN||* LIT: A220.127.116.11 Brake Assist System|
|1||738 4911S||* Automotive fault simulator, start|
|1||500 593||* Fault simulation plugs, black, set of 10|
|1||726 09||Panel frame T130, two-level|
|1||738 01||* Cable and plug box|
Articles marked with ** are additionally required.
Articles marked with * are not essential, we do however recommend them to carry out the experiment.