90105 Makeblock Laserbot

90105 Makeblock Laserbot

$349.99

Laserbot

LaserBot is a desktop laser engraver developed on Makeblock’s open-source platform. Equipped with 1.6W 445nm high power solid-state lasers, and cooperating with its software mLaser, LaserBot can easily engrave and cut many things for you, and help you to make surprises in daily life. For instance, making Christmas cards/birthday cards for your families, or engrave your honeymoon photos on the wood for decoration, etc.

Engraving graphic display

LaserBot uses a beam of light to cut, engrave, and shape designs from a variety of materials.

 

Features

• Simple but solid H-shaped structure;

 

• High-precision anodized aluminum alloy;

 

• Arduino compatible;

 

• User friendly software;

 

 

Capability:

1. 1.6W 445nm semiconductor and Solid laser: The rotation speed of its high power laser head can reach up to 200mm/s, so that LaserBot is twice as efficient as XY Plotter (with Laser Engraver Upgrade Pack) . You will save more time to realize your ideas! 2. Megapi: The powerful mainboard MegaPi brings you unprecedented experience of laser engraving. It not only has superpower to control various motors, but also very easy to use. Moreover, you can also combine it with Raspberry Pi to explore more.
 
3. High-precision: Up to 0.1mm, carefully engraves every details. 4. Engraving area: Up to 383mm×367mm
 
 

Software:

mLaser: This is a new software for LaserBot, our DIY laser cutter. It includes both simple mode and expert mode for different levels of users. Also we simplified the operation and setting procedure to save more time. Therefore, it is so user friendly that everyone can use to control LaserBot.

 

Safety:

Goggles: Specifically designed Goggles for LaserBot to protect your eyes during laser engraving.

Velcro sticker pad for Laser head: In order to avoid excessive scattering of laser, we specially designed Velcro sticker pad for Laser head. Only one step needed to install the Velcro sticker pad to laser head.

WARNING

Wavelength γ= 445nm blue-violet diode laser

DO NOT directly irradiate eye or skin by the laser beam.

 

WARNING: As laser energy gains higher density, make sure corresponding protection measures are taken while using.

• No direct eye-contact with the laser light path;

• DO NOT irradiate others by the laser;

• Keep away from children and other people who are not familiar with laser usage;

• When the laser is used, take eye protection measure;

• When certain materials are cut by the laser, it is possible for them to produce toxic smoke, take ventilation measures.

 

 

Comparison to XY Plotter
(with Laser Engraver Upgrade Pack)

If you’re trying to figure out the difference between LaserBot and XY Plotter (with Laser Engraver Upgrade Pack), check this comparison chart.

LaserBot

XY Plotter
(with Laser Engraver Upgrade Pack)

Main Control Chip ATMEGA2560-16AU Arduino Uno
Extension Ports 1.Aluminum Extrusion Parts
2.Timing Pulley 18T
3.Linear Motion Slide
4.MegaPi (Controller)
5.Stepper Motors
6.MegaPi Stepper Motor Drivers
7.1.6W 445nm High-Power Solid State Laser
8.Micro Switch
9.Cables
10.Other Hardware and Accessories
1.Aluminum Extrusion Parts
2.Timing Pulley 18T
3.Linear Motion Shaft 4.D8×496mm Linear Motion Slide Unit 8mm
5.Makeblock Orion(Controller)
6.Stepper Motors
7.Stepper Motor Drivers
8.9g Micro Servo Pack
9.500mW 405nm High-Power Solid State Laser
10.Micro Switch
11.Cables
12.Other Hardware and Accessories
Electronics MegaPi (Controller) Makeblock Orion(Controller)
Laser 1.6W 445nm High-Power Solid State Laser 500mW 405nm High-Power Solid State Laser
Communication USB Type B Micro USB
Software mLaser mDraw & Benbox
Supports file type *PNG, *JPG, *BMP, *SVG, *DXF SVG(mDraw) JPG, PNG, BMP, GIF, DXF(Benbox))
Power Supply 100-240 V~50/60Hz AC/DC Power adapter, 12V/2.0A 100-240 V~50/60Hz AC/DC Power adapter, 12V/3.0A

Additional information

Weight 6 lbs
Dimensions 12 × 12 × 12 in
Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)